3044am永利集团3044noc



      3. Home  >
      4. Products  >
      5. Texture Agent  >
      6. Color rendering agent T-20
        7. Floating color agent T-20 Floating color agent T-20
        Floating color agent T-20 Floating color agent T-20

        Color rendering agent T-20

        Introduction：
        Color rendering agent T-20 should be dry-blended with pigments or homogenized with the resins andpigmentsduring extrusion to produce a spot powder. You can then dry-blend with the spot powder andthe wrinkle base powder to create the stable, effective wrinkle pattern. Youarerecommended to incorporate 0.8-1.2% T-20 in hybrid system, 0.3-0.6inepoxy/dicyandiamide system, 0.1-0.6% in epoxy/ matt hardener system.

        Typical physical data:

        Appearance: white powder

        Soft point (℃): 110-120℃

        Bulk density (g/l): 500-600

        Volatiles (%): ≤1.0

        GET A QUOTE  Download pdf
        Color flooding agent T-20(TDS)
        1. Description
        T-20 should be dry-blended with pigments or homogenized with the resins andpigmentsduring extrusion to produce a spot powder. You can then dry-blend with the spot powder andthe wrinkle base powder to create the stable, effective wrinkle pattern. Youarerecommended to incorporate 0.8-1.2% T-20 in hybrid system, 0.3-0.6inepoxy/dicyandiamide system, 0.1-0.6% in epoxy/ matt hardener system.

        2. Typical physical data
        Appearance white powder
        Soft point (℃) 110-120℃
        Bulk density (g/l) 500-600
        Volatiles (%) ≤1.0

        3. Suggested formulation
        Epoxy 400   Epoxy 800   Epoxy 800
        Polyester 50/50 400   Dicyandiamide 35   X68 matt agent 78
        MCB 0.5   MCB 0.8   MCB 2
        BaSO4 0-150   BaSO4 0-150   BaSO4 0-150
        TiO4 80   TiO4 80   TiO4 80
        Dry-blend with 0.8-1.2% T-20
        and 0.3% pigments        		   Dry-blend with 0.3-0.6% T-20
        and 0.3% pigments        		   Dry-blend with 0.1-0.3%T-20and0.3% pigments

        4. Characteristics
        The size of the texture pattern will be connection with the pill flow of the basepowder. Higher pill flow drive larger texture pattern. You are recommendedtouseepoxy/dicyandiamide base formulation with little quantity of fillers to create the larger cracktexture pattern.
        You are recommended to homogenize with T-20 and pigments before dry-blendingwiththe base powder.
         

        INQUIRY



          XML地图