3044am永利集团3044noc



      3. Home  >
      4. Products  >
      5. Appearance Modifiers and Defoamers Additives  >
      6. General flowing agent T-988

        7. General flowing agent T-988

        Introduction：
        T-988 is based on a liquid acrylic polymer that has been converted into free-flowing powder byadsorptiononto silica-type filler. It is well suited for tall kind of thermoplastic and thermosetting powder coating.

        GET A QUOTE  Download pdf

        General flowing agent T-988（TDS）
        1. Description
        T-988 is based on a liquid acrylic polymer that has been converted into free-flowing powder byadsorptiononto silica-type filler. It is well suited for tall kind of thermoplastic and thermosetting powder coating.
        2. Typical physical data

        Appearance free-flowing powder
        Active component ＞55%
        Volatiles(%) ＜1

        3. Characteristics
        ►T-988 can reduce coating film surface tension; eliminate the defects of craters, pinholesandfisheyes. It can conspicuously enhance the coating gloss and DOI.
        ► T-988 is a silicone-free flowing agent. It won’t cause any recoating problem,increase wettabilityandreducethe orange film
        ►You are recommended to incorporate 0.8-1% to reach the best surface properties. T-988didnot contain any flow accelerant additives.
        ► T-988 is general flow and leveling agent suitable for all kind of powder coatingincludingepoxy, polyesters, polyurethanes, hybrids, epoxies, and acrylics.
        4.Packaging and storage
        Polyethylene lining, net weight 25KG caveat; stored in a cool and dry place to avoidmoistureabsorption.In the < 30 ℃ is valid for two years at room temperature

        INQUIRY



          XML地图