3044am永利集团3044noc



      3. Home  >
      4. Products  >
      5. Appearance Modifiers and Defoamers Additives  >
      6. Surface modifier T-402
        7. Surface modifier T-402 Surface modifier T-402
        Surface modifier T-402 Surface modifier T-402

        Surface modifier T-402

        Introduction ：
        T-402 is a special surface modifier for powder coatings,whichcan effectively reduce the melting viscosity and surfacetensionofthe system, greatly reduce surface defects, and improve thesaltsprayresistance and boiling resistance of the film.

        GET A QUOTE  Download pdf
         

        Surface modifier T-402(TDS)
        1、Descaription
        T-402 is a special surface modifier for powder coatings,whichcan effectively reduce the melting viscosity and surfacetensionofthe system, greatly reduce surface defects, and improve thesaltsprayresistance and boiling resistance of the film.

        2.Typical physical data

        Appearance White powder
        Melting process temperature(℃) 130～135
        Solid content(%) ＞99%


        3.Suggested formulation
         Internal extrusion 0.5-1.5%;

        4.Purpose:
        1 、Eliminate orange peel and improve the fullness and smoothnessofthesurface.
        2 、Degassed and resistant to yellowing, suitable for thick coatingofhydroxyalkyl amide system.
        3、It is easy to take off the film during printing and transfer.
        4 、Improve the storage stability and powder loading rate of powder.
        5、Improve salt spray resistance and boiling resistance.
        6、Improve the compatibility between polyester and eliminate surfacefog.
         

        INQUIRY



          XML地图